Selling your home is a big step. And one of the most crucial parts of the process is what happens before the deal is finalized—the home inspection. If you’re preparing to sell, you cannot afford to ignore these 10 must-read tips to get your home ready for the inspection. It’s the difference between moving forward confidently and scrambling to fix last-minute issues that could cost you thousands or even derail your sale.
With so many moving parts in a real estate transaction, the inspection often becomes the moment where things either tighten up or fall apart. But here’s the good news: you’re in control. You can take practical, effective steps to set your home up for a smooth, successful inspection—and I’m going to show you how.
As a REALTOR and Broker with decades of real-world experience, I’m Robbie English. My clients choose me not just because I’m good at what I do, but because I’ve strategically studied and mastered this business to make their success my mission. I’m also a national real estate speaker and instructor, trusted by professionals across the country to teach the ins and outs of real estate. So when I talk about home inspection preparation advice, I don’t do it lightly. Let’s dive in.
TLDR: 10 Must-Read Tips to Get Your Home Ready for the Inspection
- First impressions matter—present a clean, well-maintained home before inspection day.
- Minor repairs today can prevent major red flags in the report.
- System functionality matters more than appearance; don’t ignore HVAC or plumbing.
- Transparency pays off—disclose known issues to avoid surprises.
- Robbie English and his team offer unmatched home inspection preparation advice to guide you with confidence.
Understand What the Inspector Is Looking For
You’re not trying to hide anything. That’s not the goal here. The goal is to showcase a home that’s been properly cared for, both on the surface and behind the scenes. Most inspectors aren’t nitpicking chipped paint or a slightly squeaky door. They’re hunting for safety hazards, big-ticket problems, and structural or system failures.
Start thinking like an inspector. What would raise concern if you were buying this home? Electrical panels that look unsafe? Water spots under the sink? Doors that won’t latch properly? Those aren’t just annoyances—they’re red flags.
You don’t need a full renovation. You just need awareness and action.
Clear Access to Everything
This might seem simple, but it’s one of the most overlooked steps. Make sure the inspector can access the attic, crawl spaces, electrical panel, HVAC units, and water heater without obstruction. They can’t inspect what they can’t get to.
If the inspector feels that you’re hiding something—whether you mean to or not—it sets a bad tone. It can cause delays or worse, raise suspicion. Don’t let clutter block your chances. Open the way, and open the deal.
Clean, But With Purpose
You’ve probably heard that cleanliness counts. But it’s more than aesthetics. A clean home feels maintained, respected, and loved. Dusty vents, grime around faucets, or spiderwebs in the corners tell a subtle story—that you’ve let things go.
This doesn’t mean you need to deep-clean like you’re hosting a black-tie gala. But it does mean you should vacuum the floors, wipe down surfaces, and clear cobwebs. Make it feel fresh, cared for, and ready for scrutiny.
Because it is.
Tackle the Obvious Repairs
That cracked window pane? Fix it. The leaky faucet? Replace the washer. Loose doorknob? Tighten it. You’d be surprised how often buyers use inspection reports to renegotiate—even over small stuff.
These tiny problems add up. One or two might be dismissed. But ten little issues suggest a pattern: deferred maintenance. It shakes buyer confidence and gives them leverage.
Take care of what’s in plain sight. It’s the easiest way to protect your asking price and reduce friction in the transaction.
Check and Service Major Systems
Before you panic, no—you don’t need to replace your HVAC, water heater, or roof (unless they’re actually failing). But you do need to make sure they’re functional and well-maintained.
Change your HVAC filters. Flush the water heater if it’s been a while. If your system hasn’t been serviced recently, now’s the time. These steps show diligence and help you avoid surprises when the inspector turns them on.
This is one of the top areas where home inspection preparation advice makes a difference. When systems work the first time they’re tested, buyers breathe easier—and so do you.
Test Safety Features
Smoke detectors should work. Carbon monoxide detectors too. If you don’t have them, get them. Check GFCI outlets near water sources. Confirm handrails on staircases are secure.
Safety issues stand out in inspection reports, even when everything else checks out. They’re quick to fix and cheap to handle. But if left untouched, they can sour the entire impression.
And impressions matter—especially to someone deciding whether to spend hundreds of thousands of dollars on your property.
Disclose Known Issues Honestly
This might feel counterintuitive. Why admit to a problem before it’s found?
Because honesty builds trust. If you’ve had a roof leak in the past but fixed it—say so. Show the paperwork. If you know the garage door opener works intermittently, disclose it.
The inspector will likely find it anyway. When you’re upfront, it creates transparency. It reduces buyer suspicion and sets a cooperative tone.
Mind the Details—They Matter
Look around with fresh eyes. Loose trim, broken blinds, burned-out light bulbs—these seem minor, but they contribute to the overall narrative. And that narrative should be, “This home has been taken care of.”
Again, you don’t need perfection. You need pride of ownership. That’s the feeling buyers pick up on, whether consciously or not. A little polish goes a long way.
Make Sure Utilities Are On
If the house is vacant or you’ve already moved out, make sure all the utilities remain on for the inspection. Without power, water, or gas, the inspector can’t test key systems.
That’s a surefire way to end up with a limited report—something buyers don’t appreciate. It can also cause delays, re-inspections, and uncertainty.
You want the inspection to be thorough, not incomplete.
Leave for the Inspection
Yes, you love your home. Yes, you want to be there to answer questions. But don’t.
Leave.
Inspectors prefer working without owners hovering. So do buyers. It gives everyone space to evaluate without pressure or influence. And frankly, your presence could backfire.
Let them do their job, and let your home do the talking.
You’ve now walked through the 10 must-read tips to get your home ready for the inspection, but what makes the difference between following advice and executing it flawlessly?
At Uncommon Realty, I’ve spent decades in the trenches—not just selling homes, but building a system that turns complex real estate processes into seamless, smart strategies. From day one, we offer the kind of home inspection preparation advice that helps you present your home in the best light, reduce renegotiations, and protect your value.
And here’s something most agents won’t tell you: the inspection isn’t just about condition. It’s about perception. My experience, sharpened by teaching thousands of agents as a national real estate speaker and instructor, gives my clients a unique edge. I know how inspectors think. I know how buyers react. And I know how to guide you through it all with clarity, confidence, and control.
Other agents may go through the motions. I don’t. I’ve strategically worked to master real estate—not for ego, but for you. So when it’s time to get your home inspection-ready, don’t leave it to chance. Let’s do it right.
Ready to put these 10 must-read tips to get your home ready for the inspection into action? Let’s connect. You bring the home—I’ll bring the strategy with the help of Uncommon Realty.
With the right preparation, a great guide, and a commitment to excellence, you can navigate your inspection with zero surprises and a lot more peace of mind.
Let’s make it happen.